Compatible SFP+ SFP-10G-SR transceiver with duplex LC connector reaches 400m over OM4 MMF (300m over OM3 MMF). Compliant with SFF-8431, SFF-8432 and IEEE 802.3ae for multi-vendor interoperability, it supports DDM monitoring via SFF-8472 2-wire serial interface. Low-power and high-speed, it fits data centers, enterprise wiring closets, carrier transmission, radio & baseband units.
The 25G SFP28 SR transceiver modules are designed for 25 Gigabit Ethernet links over multimode fiber up to 100 meters in length. They comply with the SFP MSA and IEEE 802.3by standards. This optical transceiver complies with RoHS regulations.
Hot-pluggable QSFP+ transceiver with duplex LC connector supports 40km reach over 1310nm single-mode fiber for 40GBASE Ethernet. Compliant with QSFP+ MSA, IEEE 802.3bm 40GBASE-ER4 and OTU3, it provides DDM monitoring via I2C interface. Easy to install, it suits data centers, HPC networks and enterprise core/distribution layers.
The 100G QSFP28 ER4 transceiver modules are designed for 100 Gigabit Ethernet links over single-mode fiber up to 40 kilometers. They comply with the IEEE 802.3ba and CAUI-4 interface standards. This optical transceiver complies with RoHS regulations.
This 100G QSFP28 passive high-speed cable provides a cost-effective solution for establishing 100G links between QSFP-100G ports within a rack and between adjacent racks. It has been tested for reliability with the target switch and features low insertion loss and crosstalk. It complies with the IEEE 802.3, SFF-8665, and QSFP28 MSA standards.
This 40G QSFP+ passive copper high-speed cable is designed specifically for 40GBASE Ethernet. It provides a direct QSFP+-to-QSFP+ cabling solution. It complies with the IEEE 802.3ba Ethernet standard and the QSFP MSA standard. This easy-to-install, high-speed, and cost-effective cable is used for short-distance connections within data center racks or between adjacent racks.
The 25G SFP28 DAC (Direct Attach Copper) is a cost-effective short-distance interconnect solution suitable for data centers and enterprise networks. Designed with high-quality pure copper wiring and an integrated SFP28 connector, it supports high-speed, stable 25 Gbps data transmission. It offers advantages such as low power consumption, low latency, no need to configure optical modules, and plug-and-play functionality.
10G SFP+ passive direct-attach high-speed cables provide a cost-effective connection solution for establishing short-distance 10G connections within a rack or between adjacent racks in a data center. This passive direct-attach high-speed cable is an ideal solution for 10GBASE Ethernet networks, offering reliability, low latency, and near-zero power consumption. Compared to fiber optics, high-speed cables are more cost-effective and durable.
10G AOC Active Optical Cable adopts 850nm VCSEL solution with multi-mode fiber, featuring LC duplex connector and DOM digital diagnostic monitoring. It offers low signal loss, excellent anti-electromagnetic interference performance and lightweight routing, making it suitable for data center switch interconnection, storage area networks, enterprise computer rooms and 10G short-distance high-speed transmission scenarios.
25G AOC Active Optical Cable adopts 850nm VCSEL solution with multi-mode fiber, equipped with LC duplex connector and supports DOM digital diagnostic monitoring. Featuring low signal loss, excellent anti-electromagnetic interference performance and flexible routing, it is widely deployed in data center interconnections, 5G base station fronthaul and short-distance high-speed transmission in enterprise computer rooms.
QSFP+ active optical cables are direct-attach optical cables that use QSFP+ connectors and operate over multimode fiber. These active optical cables comply with the SFF-8436 QSFP+ MSA standard and the InfiniBand FDR10 standard. Compared to using separate optical modules and fiber patch cords, they offer a cost-effective solution and are suitable for 40 Gbps connections within a rack and between adjacent racks.
The SFP-100G-AOC QSFP-compatible active optical cable is a direct-attach fiber assembly featuring a QSFP28 connector, designed for use in multimode fiber environments. This cable complies with the QSFP MSA and RoHS-6 standards. Compared to conventional optical modules and fiber patch cords, it offers a cost-effective solution and is suitable for 100 Gbps connections both within a rack and between adjacent racks.
800G OSFP DCO is a coherent pluggable optical module thatcompliant to the OSFP Hardware Specification.It is based on Modem Probabilistic Constellation Shaping (MPCS) DP-QPSK to DP-16QAM modulation, polarization diversity coherent Intradyne detection and advanced electronic link equalization.The pluggable optical module contains a PCB with a 60-contact card-edge electrical interface to external Host/Client-side logic.
The 400G QSFP-DD ZR+ Transceiver is a high performance, high output power,cost effective module for optical datacommunication applications from 100G to 400G.The 400G QSFP-DD ZR+ is designed to 100G/200G long haul and 300G/400G Metro IP over DWDM applications without inline chromatic dispersion compensation.
The 400G QSFP-DD ZR+ Hpwr(+1dBm) Transceiver is a high performance, high output power,cost effective module for optical datacommunication applications from 100G to 400G.The 400G QSFP-DD ZR+ Hpwr(+1dBm) is designed to 100G/200G long haul and 300G/400G Metro IP over DWDM applications without inline chromatic dispersion compensation.
400G CFP2 DCO is a coherent pluggable optical module that complies with the CFP MSA CFP2 hardware specification. It is based on and DP-mQAM modulation, polarization diversity coherent internal detection, and advanced electronic link equalization technology.
The 200G/400G CFP2-DCO coherent pluggable optical module is designed based on PM-QPSK or PM-16QAM, supports C-Band 190.69375~196.65625THz adjustable (Flexible grid 6.25GHz), and is designed to support 200G/400Gbps single-wavelength DWDM transmission, suitable for data center 100G/400G Ethernet and OTN OTU4 metro optical transport network links.
The 100G/200G CFP2-DCO coherent pluggable optical module is designed based on PM-QPSK or PM-16QAM, supports C-Band 191.3~196.1THz adjustable (50GHz interval), and is designed to support 100G/200Gbps single-wavelength DWDM transmission, suitable for data center 100G/200G Ethernet and OTN OTU4 metro optical transport network links.
The Coherent QSFP28 Digital Coherent Optics (DCO) transceiver supports 100G transmission over distances up to 120km (dispersion limited, optionally extendable to 300km) for edge network applications. On the host side, the module can accommodate IEEE 100GE Ethernet or ITU-T OTN OTU4 signals. The line side coherent interface specifications are aligned with IEEE Std.
Driving Reliability Across Every Optical Module From R&D to Shipment
Our product development focuses on stable transmission and broad compatibility. All optical modules and fiber solutions are designed for IDCs, system integrators and telecom operators.We deliver stable, cost-effective products for mass supply, improving network efficiency and cutting O M expenses. Standard and customized optical modules support flexible network expansion and equipment upgrades with long service life.
We are a professional manufacturer and solution provider of optical modules and fiber optic cables. With our own quality control laboratory, a comprehensive testing process, and a team of professional engineers, we offer OEM/ODM customization services to customers worldwide.
How is your company doing in terms of quality control?
Each optical component is individually tested at our testing center and undergoes compatibility testing with network equipment from various brands.
Do you offer OEM customization?
We offer OEM services and can design product labels, logos, part numbers (PN), serial numbers (SN), and packaging according to your requirements.
Is it possible to purchase samples for testing?
We accept sample orders; the customer is responsible for the sample fee and shipping costs. Upon mutual agreement, the sample fee may be credited against the subsequent bulk order.
What inspections are conducted before shipment?
All products undergo rigorous testing before shipment—including light output, reception sensitivity, extinction ratio, high- and low-temperature cycling, and aging tests—to ensure consistent performance.
What is the operating temperature range of an optical module?
Commercial Temperature Range (COM): 0 to 70 °C (32 to 158 °F) Extended Temperature Range (EXT): -5 to 85 °C (23 to 185 °F) Industrial Temperature Range (IND): -40 to 85 °C (-40 to 185 °F) Storage Temperature Range: -40 to +85 °C (-40 to 185 °F)
